 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROWAVE CORPORATION v00.0404 HMC465LP5 Features Gain: 15 dB Output Voltage to 10Vpk-pk +24 dBm Saturated Output Power Supply Voltage: +8V @160 mA 50 Ohm Matched Input/Output 25mm2 Leadless SMT Package GaAs PHEMT MMIC MODULATOR DRIVER AMPLIFIER, DC - 20.0 GHz 8 AMPLIFIERS - SMT Typical Applications The HMC465LP5 wideband driver is ideal for: * OC192 LN/MZ Modulator Driver * Microwave Radio & VSAT * Test Instrumentation * Military EW, ECM & C3I Functional Diagram General Description The HMC465LP5 is a GaAs MMIC PHEMT Distributed Driver Amplifier packaged in a leadless 5 x 5 mm surface mount package which operates between DC and 20 GHz. The amplifier provides 15 dB of gain, 3 dB noise figure and +25 dBm of saturated output power while requiring only 160 mA from a +8V supply. Gain flatness is excellent at 0.25 dB as well as +/- 4 deg deviation from linear phase from DC - 10 GHz making the HMC465LP5 ideal for OC192 fiber optic LN/MZ modulator driver amplifier as well as test equipment applications. The HMC465LP5 amplifier I/Os are internally matched to 50 Ohms. Electrical Specifications, TA = +25 C, Vdd= 8V, Vgg2= 1.5V, Idd= 160 mA* Parameter Frequency Range Gain Gain Flatness Gain Variation Over Temperature Noise Figure Input Return Loss Output Return Loss Output Power for 1 dB Compression (P1dB) Saturated Output Power (Psat) Output Third Order Intercept (IP3) Saturated Output Voltage Group Delay Variation Supply Current (Idd) (Vdd= 8V, Vgg1= -0.6V Typ.) 21 13 Min. Typ. DC - 6.0 16 0.75 0.015 3.0 20 22 24 25.5 32 10 15 160 20 0.02 12 Max. Min. Typ. 6.0 - 12.0 15 0.25 0.020 3.0 15 17 23 25 28 10 15 160 160 16 0.025 9.5 Max. Min. Typ. 12.0 - 20.0 12.5 1.5 0.035 4.0 8 12 20 23 24 8 0.045 Max. Units GHz dB dB dB/ C dB dB dB dBm dBm dBm Vpk-pk pSec mA * Adjust Vgg1 between -2 to 0V to achieve Idd= 160 mA typical. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 8 - 274 v00.0404 MICROWAVE CORPORATION HMC465LP5 GaAs PHEMT MMIC MODULATOR DRIVER AMPLIFIER, DC - 20.0 GHz GaAs MMIC PUMPED MIXER Gain & Return LossSUB-HARMONICALLY Gain vs. Temperature 20 15 10 RESPONSE (dB) 5 0 -5 -10 -15 -20 -25 -30 0 2 4 6 8 10 12 14 16 18 20 22 FREQUENCY (GHz) S21 S11 S22 17 - 25 GHz 20 18 16 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 22 FREQUENCY (GHz) +25C +85C -40C 8 AMPLIFIERS - SMT 8 - 275 Input Return Loss vs. Temperature 0 INPUT RETURN LOSS (dB) -5 -10 -15 -20 -25 -30 0 2 4 6 8 10 12 14 16 18 20 22 FREQUENCY (GHz) +25C +85C -40C Output Return Loss vs. Temperature 0 OUTPUT RETURN LOSS (dB) -5 -10 -15 -20 -25 -30 0 2 4 6 8 10 12 14 16 18 20 22 FREQUENCY (GHz) +25C +85C -40C Low Frequency Gain & Return Loss 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 0.00001 Noise Figure vs. Temperature 10 9 8 NOISE FIGURE (dB) +25C +85C -40C GAIN (dB) 0.1 1 10 RESPONSE (dB) S21 S11 S22 7 6 5 4 3 2 1 0 0.0001 0.001 0.01 0 2 4 6 8 10 12 14 16 18 20 22 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0404 MICROWAVE CORPORATION HMC465LP5 GaAs PHEMT MMIC MODULATOR DRIVER AMPLIFIER, DC - 20.0 GHz 8 AMPLIFIERS - SMT GaAs MMIC SUB-HARMONICALLY Psat vs. Temperature PUMPED MIXER P1dB vs. Temperature 30 28 26 24 P1dB (dBm) 22 20 18 16 14 12 10 0 2 4 6 8 10 12 14 16 18 20 22 FREQUENCY (GHz) +25C +85C -40C 17 - 25 GHz 30 28 26 24 Psat (dBm) 22 20 18 16 14 12 10 0 2 4 6 8 10 12 14 16 18 20 22 FREQUENCY (GHz) +25C +85C -40C Output IP3 vs. Temperature 40 38 36 34 OIP3 (dBm) 32 30 28 26 24 22 20 18 0 2 4 6 8 10 12 14 16 18 20 22 FREQUENCY (GHz) +25C +85C -40C Gain, Power & OIP3 vs. Supply Voltage @ 10 GHz, Idd= 160mA Gain (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 32 30 28 26 24 22 20 18 16 14 12 10 7.5 8 SUPPLY VOLTAGE (Vdc) 8.5 Gain P1dB Psat OIP3 Group Delay -200 Deviation from Linear Phase DEVIATION FROM LINEAR PHASE (deg) 10 8 6 4 2 0 -2 -4 -6 -8 -10 0 1 2 3 4 5 6 7 8 9 10 FREQUENCY (GHz) GROUP DELAY (pS) -250 -300 -350 -400 0 1 2 3 4 5 6 7 8 9 10 FREQUENCY (GHz) 8 - 276 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0404 MICROWAVE CORPORATION HMC465LP5 GaAs PHEMT MMIC MODULATOR DRIVER AMPLIFIER, DC - 20.0 GHz Absolute Maximum Ratings Drain Bias Voltage (Vdd) Gate Bias Voltage (Vgg1) Gate Bias Voltage (Vgg2) RF Input Power (RFin)(Vdd = +8.0 Vdc) Channel Temperature Continuous Pdiss (T = 85 C) (derate 24 mW/C above 85 C) Thermal Resistance (channel to ground paddle) Storage Temperature Operating Temperature +9.0 Vdc -2.0 to 0 Vdc (Vdd -8.0) Vdc to Vdd +23 dBm 150 C 1.56 W 41.5 C/W -65 to +150 C -40 to +85 C Typical Supply Current vs. Vdd Vdd (V) +7.5 +8.0 +8.5 Idd (mA) 161 160 159 8 AMPLIFIERS - SMT 8 - 277 Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED 2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY 3. LEAD AND GRPUND PADDLE PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 6. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.25mm MAX 7. PACKAGE WRAP SHALL NOT EXCEED 0.05mm 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0404 MICROWAVE CORPORATION HMC465LP5 GaAs PHEMT MMIC MODULATOR DRIVER AMPLIFIER, DC - 20.0 GHz 8 AMPLIFIERS - SMT Pad Descriptions Pad Number 1, 3, 4, 6-12, 14, 17, 18, 20, 22-28, 31, 32 Function Description Interface Schematic N/C No connection. These pins may be connected to RF ground. Performance will not be affected. 2 Vgg2 Gate Control 2 for amplifier. +1.5V should be applied to Vgg2 for nominal operation. 5 RFIN This pad is DC coupled and matched to 50 Ohms from DC - 20.0 GHz. 13 Vgg1 Gate Control 1 for amplifier. 15 ACG4 Low frequency termination. Attach bypass capacitor per application circuit herein. 16 ACG3 21 RFOUT & Vdd RF output for amplifier. Connect the DC bias (Vdd) network to provide drain current (Idd). See application circuit herein. 29 ACG2 Low frequency termination. Attach bypass capacitor per application circuit herein. 30 ACG1 Ground Paddle GND Ground paddle must be connected to RF/DC ground. 8 - 278 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0404 MICROWAVE CORPORATION HMC465LP5 GaAs PHEMT MMIC MODULATOR DRIVER AMPLIFIER, DC - 20.0 GHz Application Circuit 8 AMPLIFIERS - SMT NOTE 1: Drain Bias (Vdd) must be applied through a broadband bias tee or external bias network. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 8 - 279 v00.0404 MICROWAVE CORPORATION HMC465LP5 GaAs PHEMT MMIC MODULATOR DRIVER AMPLIFIER, DC - 20.0 GHz 8 AMPLIFIERS - SMT Evaluation PCB List of Materials for Evaluation PCB 108347 * Item J1 - J2 J3 - J4 C1, C2 C3 - C6 C7 - C9 U1 PCB** Description SRI K Connector 2mm Molex Header 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0603 Pkg. 4.7 F Capacitor, Tantalum HMC465LP5 108345 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. ** Circuit Board Material: Rogers 4350 * Reference this number when ordering complete evaluation PCB. 8 - 280 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0404 MICROWAVE CORPORATION HMC465LP5 GaAs PHEMT MMIC MODULATOR DRIVER AMPLIFIER, DC - 20.0 GHz Notes: 8 AMPLIFIERS - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 8 - 281 |
Price & Availability of HMC465LP5
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |